Toyota Nation Forum banner
1 - 1 of 1 Posts

·
Alltrack Wannabe
Joined
·
639 Posts
Yes.
Remove the clip that holds the compressor housing on, remove the housing, remove the lock [roll] pin [if it has one], reinstall the housing at the desired angle. You can rotate it some if need be.
The only hard part is you are going to have to make the wg actuator attach to the housing in a different way. A bracket or such...
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top