Toyota Nation Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I replaced the water pump, and timing belt. The haynes manual says "Do not rotate the crank pulley counterclockwise", but I did about 1/2 rotation before deciding to check again on the direction.
I have been told that it should not be a problem, but I just finished putting it back together, and the motor spins freely. I turned it by hand first, to make sure I didn't bend valves.

My repair manual offers no help..

Any help appreciated.

Brian
 

·
93 Z24 and 78 Bronco
1993 z24
Joined
·
4,025 Posts
you're timing is probably all out of whack...

you won't bend the valves, all camrys have non interference engines
 
1 - 3 of 3 Posts
Top