Toyota Nation Forum banner
1 - 3 of 3 Posts

· Zzzz
Camry
Joined
·
2,353 Posts
you're far better off doing other things like buying a CF/FG hood and/or quarter panels and going with light rims, removing your subs and taking the spare out with the jack.

if you want to do a track run, just pop out the passenger seat and rear seat.

Personally, I wouldn't consistently leave my seats out unless I had another car to use as a daily driver.
 

· Zzzz
Camry
Joined
·
2,353 Posts
MadDawg said:
i meant as in shatter resistant, as in break resistant... could you emagine plastic or fiber glass clear windows?
umm, all glass will break, automobile glass is made of glass with layers of plexiglass on both sides so if the glass itself breaks it will not actually go through either side.

this has been in use since IIRC the 50's.

If you used acrylic or fiber glass, your windows would bend in at any decent speed, both acrylic and fiber glasses are not very durable at all, I've worked with both ample times and neither are suited for use on an automobile, nor would they have any benefits over the glass that is used.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top