Toyota Nation Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I have a buddy at work with a Toyota Matrix, he bought aftermarket 18x8 wheels and doesn't like the way the rears don't sit flush with the fender (about 1 1/4" in). He wants wheel spacers but neither him nor I have any clue about spacers and what needs to be done to use 'em. I did some research and the Matrix shares the same bolt pattern (5x100) as the Celica, so I'm assuming that a set of Celica spacers will work for his application. The question is, can he just buy spacers and bolt them on? Or will he need longer studs? Any help at all is much appreciated!
 

·
Registered
Joined
·
63 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #3
Thanks much! He is looking at something close to 25mm, so studs will be an issue :(

I'll have him check out H&R, thanks again!
 

·
Registered
Joined
·
63 Posts
welcome... ic you can post up some pics when your friend is done... i'm interested in doing too..

-pat
 
1 - 7 of 7 Posts
Top