Toyota Nation Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
Sorry dudes for asking this. I'm finally into converting my stock carby engine to a 4agze on my AE90 liftback. The red top is on my list but thought of getting your opinions.:D And which model does this engine comes from??
 

·
Guitars and Cars
2001 Corolla S
Joined
·
3,350 Posts
The 4a-gze comes in first generation (AW11) MR2 Supercharged.
And in Japan it is in the Corolla GT-Z (AE92).
 

·
Registered
Joined
·
5,036 Posts
ae101 gtz's..... just like the ae92 had the 16v, the ae101 had a 20v
 

·
Registered
Joined
·
478 Posts
MAP wired GZE's have boost cut problems >12 psi. Best GZE SC performance setup is AE101 motor using AFM AW11/AE92 wiring and ecu for ~14psi boost. Gruntbox is available to enrichen fuel < 3000rpm too.
 

·
Wild on the Flip Side
Joined
·
745 Posts
my vote is to go with the 3rd or 4th gen GZE (late AE92 GT-Z or the AE101 GT-Z). :)

there is a way to boost more than 12psi with a 4th gen GZE.
have a friend running 14psi with a pulley kit and some other friends running 18psi on twincharged GZE's back here.
if i'm not mistaken, you just have to play around with the vacuum lines. :)


hope this helps. :)
 

·
Registered
Joined
·
17 Posts
Discussion Starter #10
thanks dudes for your reply.. I guess i'll start lookin for the AE101 GZE. Will update you once it has been done..OR will bug you guys if i need further assistance..:lol:
 

·
Guitars and Cars
2001 Corolla S
Joined
·
3,350 Posts
Right on I though they dropped the GT-Z after the AE92, that's cool that there is an AE101 GT-Z. Now I want one:D
 

·
The Return of the Red Coupe
2010 RAV4 V6
Joined
·
19,666 Posts
Chris Corolla S said:
Right on I though they dropped the GT-Z after the AE92, that's cool that there is an AE101 GT-Z. Now I want one:D
And I thought you knew everything about corollas!! :hammer:

:lol:
 

·
Registered
Joined
·
1,945 Posts
VooDoo said:
my vote is to go with the 3rd or 4th gen GZE (late AE92 GT-Z or the AE101 GT-Z). :)

there is a way to boost more than 12psi with a 4th gen GZE.
have a friend running 14psi with a pulley kit and some other friends running 18psi on twincharged GZE's back here.
if i'm not mistaken, you just have to play around with the vacuum lines. :)


hope this helps. :)

you have a friend running 14 psi or is it you fafi? hehehehe :D



my vote also goes to the late gen. AE101 GZE! :cool:
 

·
Wild on the Flip Side
Joined
·
745 Posts
micro214_kp61 said:
you have a friend running 14 psi or is it you fafi? hehehehe :D



my vote also goes to the late gen. AE101 GZE! :cool:
yup. he's a friend (you know him from the other board.. goes by the handle of sshe10pmj... ride's an AE92).

i'm still running stock boost (8psi) ... but i'm starting to get the pieces together for a twin charger (i just love torque!). hope to be running 14psi low boost and 18psi high.:D
 
1 - 16 of 16 Posts
Top