Car looks mint sorry to hear about the cop he's got nothing better to do hopefully soon we can do a meet lmk

 

Yeah im down to have a meet. How exactly do we plan one lol

 

Last summer this lady decided to make a left turn before the traffic could go first. I didn't see her because a truck was blocking my view until it was too late. Nothing big, but this started all the mods




Some pics after the body work
-Repaint front bumper
-Fill license plate holes
-Correct some scrapes and one hole under bumper
-Black front and rear emblems
-Trunk respray and dent fix (I backed into a table :facepalm





Bought This EZ lip off ebay, in hope to prevent the new body work from any scrapes. A year later and I have only scraped it once but the lip saved it 100%. But I have to admit the camry is very high

Used tape to see how it would look





Final fit - I got bored one day and decided to take the air out of the front two tires




Gas Station Pic

 

Bought a roof spoiler off of ebay. Paint job matched but the spoiler had waves in it.

Test fit



Held it down with tape for the first day and baked in the sun




Decided to take all the wheels off and clean them. They had heavy brake dust from previous owner. Ill probably do this again this summer





LED DRLs and Parking lights





Plastic dipp rear spoiler- Paint later this summer, Hopefully



TRS 50w 6k low and Fogs

 

Independent fog light with Factory Stalk





Bought a spare headlight off ebay, Baked open and sprayed black

Before Shots



After



Took the bulb from my dad van and kind of set it in the headlight to see the output- I tryed to fix the cut off








Strut bar- Handles much better in turns. Can't wait to get more



Got Weapon R installed- Definitely worth every penny

 

Lookin good! What LED lights are you using? Seem to be holding up pretty well?

 

Thanks! I bought the DRL,reverse and license plate off amazon and ebay. The parking bulb I bought off super bright leds.com I have no problems with them so far and they match my HIDs so im happy. Eventually I want to convert my inside to all LEDs but Im spending in other parts of the car right now. Same thing with my mats, i have been meaning to buy weather tech liners since i bought it :grin:

 

+1 which company did you go with for the DRL's and switchbacks and what headlight housing did you buy

 

Looked through my inbox and found my ebay DRLS. I think I bought the last the seller ( precisionleds305 ) was selling so ebay sent me to this link

http://www.ebay.com/itm/like/251215950406?lpid=82&chn=ps

On the 2010-2011 the parking lamp and turn signal are two different bulbs, so no need for a switch back. You could benefit from it as the 07-09 have the same bulb.

I bought a OEM SE headlight for $90 on ebay, baked it open sprayed it black and resealed. I also attempted to fix the cut off.

I plan to take the blacked out headlight and open it again. This time i want to tint the clear part of the headlight slightly maybe 50% so i can get a smoked look.
Clear part of headlight

 

Bought something :grin:







Sprayed my weights black to hide behind the wheels

 

I don't know how to start a meet unless you know one that is going on in the tritate. Maybe we can organize something I know back in the day on Wednesdays there used to be car meets off the belt by the toys r us in the lot. I like the idea with the headlights looking to do something similar and maybe do a retro fit but the cars on hold im modding my bike at the moment.

 

Maybe a park thats open really late. Canarsie pier has a nice lot and open until 2 am. But i think we need to have a permit.

http://www.nyharborparks.org/visit/capi.html

 

Ok sounds good. I don't care about the thread jacking, its all good.

 

Finally got my rims installed

Specs are

Wheel Brand:TSW Wheels
Wheel Model:Nurburgring
Wheel Color:Gunmetal
Wheel Diameter:19"
Wheel Width:8"
Wheel Offset:35
Wheel Weight:20.5
Wheel Construction: Rotary Forged

Tires
BridgeStone Potenza S-04 Pole Position (Max Performance Summer)
245/35R19 93Y






Its hard to notice but at that time I had no center caps. I installed today but had no space on my phone to take a pic.
The car drives a lot better. I havent pushed it much, im breaking in the tires. But from what I noticed the steering wheel is noticeably heavier which I like, feels more sporty. Also when im changing lanes the body roll has significantly decreased, i cant wait to ripp it. It handles bumps better as well.

 

I kinda like the rims. You got any side shots of the car? Curious if the car is lowered, or if you needed some spacers or anything.

 

Thanks. Ill get side pics soon. Kind of raining a lot over here. Im not lowered...yet, thinking H&R springs.And i don't have any spacers (I may go with 5 mm later, not because they rub, just because I want it to poke out a bit) nor did i modified anything, just used the centering ring the rims came with and slapped it on there. Only thing was the stock lugs didn't fit so I had to buy new lugs and a new lock.

 

Ok finally got some nice weather

Some side pics

 

I bought a heap of stuff from weathertech

TechShade Windshield Sun Shade
Front and Rear FloorLiner DigitalFit
Cargo Liner
TechCare FloorLiner and FloorMat Cleaner/Protector - KIT















Everything fits really well. The windshield sun shade fits like a seconds windshield, unlike the universal fit one I had before that just covered the majority of the windshield. The second row I wish the side were a little taller and stretched under the seat more, but the cargo and fronts fit perfect.

 

how well is the lip holding up? did you use any screws or just the 2 sided tape that it comes with?

 

The lip is surprisingly holding up really well. I expected it to sag after the harsh winter. But it has been through the summer, winter with snow and a strict power wash every week and not at all do i see anything sagging. I did purchase a sti v limited lip that ill use screws to hold up, but it doesn't fit ill have to see if i can modify it too work.

 

Ok Its been some time and I have done a few things. I got my STI lip install, Which I need to pull forward a bit and lowered her about 3 inches on BC coilovers.

Before STI lip and with the EZ lip installed



Also bought a foam cannon, it works great and uses the same amount of soap you would use in your bucket.



STI lip installed- I need to pull it forward.



The morning before I lowered her. This was the last time i was able to get in my driveway without wood :grin:



Now I didnt take much pictures but heres a few quick pics

 

Looks super dope lowered bro.

 

I will be going lower but Im not sure when. I need to get my fender rolled, need 4 tires- I have 245 and I need 225 to go lower without rubbing, and I would like to get my exhaust done.

 

Thanks, Pictures really dont do any justice, I wish the picture would come out like you see them in real life. I need to buy a crazy camera to take shots.

How did your lip come out? And how did you mount your license plate?

 

Thanks, Pictures really dont do any justice, I wish the picture would come out like you see them in real life. I need to buy a crazy camera to take shots.



How did your lip come out? And how did you mount your license plate?

Where in NY are you located lol? Maybe we could do a mini meetup if your not too far from the NJ/NY border.
I got a JDM license plate relocate off of Amazon.

 

Your car looks insane with the lip! Are you going to get one for the rear or nah? And I live in queens by that new casino that opened up.

http://www.rwnewyork.com/index.php

I would definitely love to have a meet. I know me and 09Camree was trying to arrange one. Is that far from you?

 

Your car looks insane with the lip! Are you going to get one for the rear or nah? And I live in queens by that new casino that opened up.

Thanks man. Yea I just got my side skirts, rear roofline spoiler, SE bumper, and SE lower spoiler for the rear. Should have it all painted and on within the next month or so.

Yea i'm out by Philadelphia. It's about 1 hour and 45 minutes from me or so. We should try to meet up at a regional car show or meet. I'm not sure if your know about CamryNation on FB but you might find some more NY members and enjoy that group.

Camry is looking dope, can't wait to see what else you got planned.

http://www.rwnewyork.com/index.php

I would definitely love to have a meet. I know me and 09Camree was trying to arrange one. Is that far from you?

 

Lower the camry about 1/2 a inch more this week. I am now about 4 inches from the ground. I also fixed my lip, Much more satisfied with it now.

 

Again i went a little lower. I also took out my 68 smd led bulb for a brighter and better output 10 XB HB3 LEd bulb

http://www.vleds.com/6k-white-10-led-drl-fog-light-bulbs-hb3-9005-h10-9145-1-pair.html







I now rub when i hit big bumps a little fast. Ill have to get my fenders rolled asap

 

Car looks amazing let's set a date I can meet whenever pick a day that works for you and I will make it work with my schedule we can meet in Staten Island its between jersey n queens or in Brooklyn Cesar's bay idc I'll go wherever I'm getting my exhaust done next week so let's do something the first week in August !!!!

 

Ok the saturday aug 1, can work. What are you doing to your exhaust? Are you going to fix the bent upfront? I'll be doing my exhaust soon as well, but im looking for a shop that does mandrel bending. What shop are you going by?

 

Car looks pretty much perfect. Very well done.

 

The new DRL's are sweet! So I assume you loose high beams with them? Do they power correctly with the DRL voltage? My '07 DRL voltage hovers around 6v and I haven't seen an led bulb spec actually lists that operating voltage.

 

Yeah, but i don't really have a need for high beam. NYC is so bright day or night and my HIDs are pretty bright so they help a lot.
As far as i know you can buy the DRLs but some may flicker if you really stare at them because of the low voltage but if you dont pay attention you don't see it. The new ones i have in, i don't see them flicker.

 

I envy you. Your car stance looks perfect. My Camry is on coilover but its sitting at almost stock height. Anything lower and I will scrap badly over the driveway but hey, I guess you have to pay to play right.

 

haha thanks :grin:

I built this the night before i lowered her



I cant get in without it

 

got my camber bolts and LED turn signals.



Much bigger than stock and way brighter



The main reason I switched to LEDs is so it would blick amber but it wouldn't show through the lens. And no they are not switch backs





Yes they blink faster but I like it