For my 02 I went with Alpine SPS-610C it comes with the tweeters for the dash also. I made my own brackets for the door and modified the original brackets for the dash. If that helps.

 

The real issue is the mounting height of speaker. looking at the specs of the speaker I bought its about 3.33 inches and the other speaker I was looking at is around 1.93 inches

 

Carlos,

The best advice I can give you is to log onto www.Crutchfield.com. ill out what car you have and they will have many options for you in the speaker department. Site will tell you what fits and what does not. You even get wiring harness and adapters or free or for a very reasonable price. I have been ordering from them for over 20 years will no problems.

 

I ordered some speakers from them a few days ago. The speakers I ordered will fit the back but not the front the. Advisor told me I would have to downsize on the front to around 5.5 but I found a 6.5 speaker. Its pretty small and it comes with the bracket to fit the 6x9 opening

 

I have 6x9's in my front doors. I did use a normal 6x9 ~1" thick speaker adapter...

Mounting depth.... speaker might hit window.... should be plenty of room for most 6x9's out there when attached to proper adatper
Mounting height... speaker hits door panel.... which usually needs trimming or the door ring

http://metraonline.com/part/82-8146
https://d1929i6tmzfvz5.cloudfront.net/media/guides/ta871.pdf
http://www.aius.net/images/catalogs/ai_catalog_2013.pdf
http://car-speaker-adapters.com/items.php?id=SAK010
https://pac-audio.com/index.php?controller=attachment&id_attachment=1276
https://tacotunes.com/shop/toyota-c...amry/toyota-camry-6x9-heavy-duty-speaker-adapter-front-door-installation-kit-2/

 

Which adapter did you use I'm going with Rockford Fosgate T1693 the magnet is pretty big and I figured a adapter would make it fit so it really interfere with the windows

 

https://www.rockfordfosgate.com/products/details/t1693/
Mounting depth of that is 3.39"

Should fit no problem with an adapter, like metra/scosche...

http://i65.tinypic.com/1zx1iix.jpg

 

I would grab the adapters from the junkyard. JBL 6x9 speakers have the adapter that should be a plug n play fit for aftermarket. Due to the factory adapter having height, I don't think the speaker magnets should be an issue, at least when I did the JBL GTO 6x9 series in my 2004 XLE V6.

I've been really picky with these speaker adapters. When new speakers are installed, the door panel O ring around the speaker doesn't sit flush with the new aftermarket speaker. Factory speakers has that 'foam' material. Been trying to find a way so it seats nicely.

 

I have the jbl system taking all that crap out

 

So the aftermarket speaker 6x9 fits on the JBL speaker bracket and it still hits the window?

 

Homedepot/lowes has gasket/insulation that'll work great. Just use whatever 'weather seal' is available locally.

I've never had an aftermarket speaker not fit flush on an equivalently sized speaker adapter.

https://www.ebay.com/itm/Metra-82-8...Metra-82-8146-6X9-Speaker-Adapter-Install-Parts-Harness-For-Toyota/331644287984
https://www.amazon.com/SCOSCHE-SATA691-2002-up-Speaker-Adapter/dp/B01N6T41HE

 

I’m not worried about the speaker not sitting flush with the adapter. They usually work okay. it’s the aftermarket speaker surround that times will rattle off the door panel O cutout where the factory speaker has a foam surrounding that sits flushed with the door panel plastic cut out and this can possibilty wear out the speaker surrounding in certain areas. I’ll try get a picture on what I’m trying to describe.