Do the LED lights on the Driver's side switches work?
Check the fuse labeled ECU-B No. 2, It powers the multiplex network master switch assembly which is basically the switch group in the driver's door. This fuse is in the Driver's side side kick panel just left of your left foot dead pedal. Hopefully that is your issue, and not the networking that connects all the doors together.
If that fuse is good, maybe the connector for that switch assembly isn't plugged in fully.

 

Just fixed it. Had to hold each door switch open and closed 5 seconds at each door. Think that reset the windows somehow....weird.

 

ahh. you just calibrated the endstops for each window is my guess. The doors are networked together, but the regluator at each window probably ignores the network commands for windows until it is calibrated. Good to know!

 

Hello, i have a 2020 corolla se. 3 passenger windows wont work from the driver switch but each and every window will work on their own respective switch. Just cant control all the windows from the driver seat if that makes sense. I was thinking a relay somewhere.....anyone know about this or where i can find a wiring

 

If the master window lockout is active, this will prevent the 3 door windows from operating. Is the driver door window functioning?

 

I tried to reset the windows but when i hold the switch up it sounds like it’s resetting but after the 5 seconds it dosent do anything? Any ideas ?

 

You didn’t answer my original question. Ensure the window lockout button is not engaged on the master switch. Then report back.