wow what a great toyota forum
thanks for all the help guys ..... :thumbsup:

 

have you even searched on google?? I've seen lots of wiring diagrams online before... also remember this is not tech support, no one is here 24/7 ready to help you... if people who know are online they will help, if not they will do so when they're online.

 

searched google got lots of 3sge 5afe 7afe etc etc nothing for 5af or 4afe doesnt matter now i stripped down the loom traced wires and removed stuff i dont need like ac etc

 

Can't help you with the wiring but remember you need to swap the fuel tank & lines as well when you go from carb's to EFI.

 

na man got the car running today using a inline fuel pump walbro just underneath the car by the tank and have upgraded the hoses so they dont burst need to make the turbo manifold now etc etc but its running now

 

car is running now man

 

Seen a couple 4afe wiring diagrams online can't recall where exactly now. At bare minimum you can have an idea of ecu pin out by opening up the top of the ecu. The pin I'd will be written on the PCB board. Good luck.

 

Hey there this is a bit of a unusual conversion going from a 5af to 4afe with a possiblity of a turbo conversion later on. the car is a 1988 ae91 se limited corolla and the transplant motor is from a 1998 ae111 basically the conversion mechanically was simple 5af auto half shafts were the same length as the 4afe manual half shafts cvs were identical mounts fitted perfectly etc etc so far everything is done except the wiring which i can do myself "if" i had a ecu pinout for a 4afe which i cant believe there is not one single one on the internet ive looked high and low gone through atleast 400 post on different forums now im positive someone out there has one i have a haynes repair manual but the wiring diagram in there is for a 4age even though it covers my model with a 4afe (except it covers the series one motor not series 2) so im stumped im not going to just go start connecting up ramdom wires and hope for no smoke this is the first toyota conversion i have done so if anyone out there could help me or atleast give me the basic pins eg bat ign and earths just so i can get this darn thing going Much thanks James New Zealand

Hi I got a 5A-F 1990 AE91 I would love to know if the 4AFE distributor can work on that 5a-f engine??