I haven't done it with a Camry, but I've done it with a couple of Corollas. Basically you need the clutch pedal assembly, brake pedal, shifter assembly, shifter cables, clutch master cylinder, clutch lines, and of course, the tranny. Make sure you get the slave cylinder as well.

Also one or two of the tranny mounts might be different and you may need one from a 5-speed Camry, and then there are a couple of wiring issues to deal with.

Normally I do conversion when I swap engines, it's more cost-effective that way since you're already changing the tranny anyway. I can usually get all the other conversion parts for about $200 from junkyard.

Hope that helps.

-Doc

 

search function noob.....try and check it out

 

hey, stop acting like some dumbass kids...

Dr. Teak gave out some good info...:thumbup:

you might wanna check out Ratko's posts, he swapped in a 5 speed into his 1mz-fe Camry coupe before he sold it...

root site..
http://www.tt-cc.com/ratko/

swap info
http://www.tt-cc.com/ratko/swap/index.html

 

Dude, if you did search, you wouldve found HEAPZ of info...so mate..dnt say u did, wen u didnt!!!

Currently, Im swapping my V6 (2VZFE) to manual. IF YOU SEARCHED, you'd find that the gearbox I am using, fits all V6's (except maybe 3MZ-FE). That is, 2VZ, 3VZ and 1MZ. I was going to tell you the gearbox code...but ill let you search mate...learn some lessons.