ive had my truck for about three yrs and notices a while ago that it has coilovers on it well its about time for new shocks so i took it to my local shop and they told me they could not work on it because it has coilover shocks all the way around with clamps at the bottom of each shock giving it the 2.5" lift i know they make spacers for coilovers but i need to know should i just go with another set of coilovers and lift it with spacers or just do the work my self put regular shocks on the truck? and if i do will i loose my lift i run 31x10.50x15 tires and dont want them to rub i loose the lift.
toyo924x4
I have the same truck, and I run 31x10.50x15's with the stock suspension & shocks. The tires do not rub, so you should have no problem.
If I remember the pictures you posted. The "coilovers" you have are weany little springs over shocks..
In anycase, I highley recomend you spend the money to get rid of that bojangled junk and get back to stock.
In anycase, I highley recomend you spend the money to get rid of that bojangled junk and get back to stock.
i did post this a few mo. ago but i havent been able to log in for a while so i never got any answers but i will post a few pics i should have them up by the 29th
and yes the torsion bars are still on the truck but they are not cranked more than half way i did that myself because i did have some clearing isues in the front
and yes the torsion bars are still on the truck but they are not cranked more than half way i did that myself because i did have some clearing isues in the front
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
