mhmm, yes u do if you dont want to sag

 

Yes. I have the ARB with no winch and the 5100's. I had to raise the shocks up a notch to sit where it did minus the ARB. I am currently still on stock springs. With the TSB rear leafs and the 5100's set at 1.75" up front it sits level.

 

Thank you Silver for the reply but I am kind of new at this so when you say TSB are those the stock leafs? And the 5100's what types of shocks are those as well? Thanks again for your help.

 

Troop,
The TSB rear springs are the Toyota replacement springs for the stock 3-leaf rears that come stock. TSB = Technical Service Bulletin. If you truck has the 3-leaf pack and bottoms out frequently go to your dealer and the TSB 4-leaf rear springs installed at N/C as long as you are still in warranty. The 5100's are Bilstein height adjustable front shocks. I am still using the stock front sprints with the 5100 shocks raised up 1.75". Do some searching here and you will find pages of info on both topics.

 

i have bone stock truck

i have 5100's for it.. but it didn't sag from my arb bumper.

but the rear TSB lifted my rear end up so much i need to put billy's 5100 @ 1.75 to

remove the rake

Cheers
Warts