Blind Spot Monitor radars are installed on both left and right side of the vehicle rear bumper respectively. Observe the following photo to know the location of BSM radars.
- Keep radar and its surrounding area on the bumper clean at all If radar or its surrounding area on the rear bumper is dirty or covered with mud, the Blind Spot Monitor may behaves abnormally.
In this situation, clear the dirt or mud and drive the vehicle with the operation conditions of the BSM function for approximately 60 minutes. If the BSM is still not functioning, please have the vehicle inspected by your Toyota dealer.
- Do not subject radar or its surrounding area on the rear bumper to a strong
If the radar is shifted, the system may malfunction and adjacent vehicle might not be detected accurately. if above condition occurred, please have your vehicle inspected by your Toyota dealer.
- Do not remove radar by
- Do not attach accessories or stickers (contained metal material) to the radar or surrounding area on the rear
Do not modify the radar or surrounding area on the bumper.