Toyota Forum banner

Spark plugs replaced one case one

757 views 11 replies 7 participants last post by  West seattle  
#1 ·
Bought our Highlander with 35k certified new. Last week had the plugs replaced at Bellevue Toyota. Asked to keep the plugs to see for myself. Well one looked bad electrode was bent in. Any ideas how this happens? Could be the originals. Three had oil on the threads and three looked great.
Image

Image
 
#5 ·
A CPO purchased vehicle does not mean they replace all the original parts. No way would a dealer change the plugs on your truck at 35k miles just because they were selling it as CPO... Read the terms of your CPO contract, you get some extra warranty time on some items over the original expiration....
 
#6 ·
I agree that the bent electrode had to be from it being dropped. Either that or the Toyota tech decided to smash it down just to mess with you.

If that came out of the cylinder like that, then your piston has smacked it which would be a catastrophic failure. The cylinder would also being throwing a misfire code and your CEL would have been on.