i think in grupotoyota they said that was from a civic or integra

try putting some sqaure fog lights, they look pretty agressive in a "street" way. wel to me they do.


or.. do the home depot lip mod.. as seeen here: http://forums.club4ag.com/zerothread?id=37734



edit/

are you in so car or nor cal??

 

as to answer your question ae92boi im home grown in SoCal, i live in glendora...

 

yeah i have some fogs it helps but im still looking for a lip, ill keep searchin'

 

yeah home depot lip mod wouldnt too bad


try a lip from an older generation accord or vw.

 

The home depot lip can be rather sublte but does help. I did it and haven't had the desire to rip it off yet and I'm really fickle with things
like that

edit: I just looked that the club4ag link and I used the little stuff not anything like that lol

 

"Stock car from Japan" look would still stand out in the US where all the sedans look the same and ugly at that.

The coupe lip you can make by cutting and pasting together two 1st gen Integra lips... I assume they would also fit the sedan if modded properly... finding 1st gen Integras might be hard though.

 

a guy from here in TA told me that 95 accord stock lip will do, jus cut the middle part so you can size it to fit on yur bumper

 

thanx guys you've all been real helpful, i do like the idea of using an accord as it shouldn't be to hard to find... although for simplicity's sake the home depot lip does intrigue me... at least as long as it doesn't look like the club4ag, thats kinda ridiculous...

also im planning on buying a spoiler trunk lip, what r your thoughts?

 

yeah they guy showed my pics with the accord front lip, it looks decent and looks pretty nice, if i were you i would chose this one other than the home depot one, the owner of the guy in club4ag said that he's about to take it off anyways lol

 

wait... an idea has just stricken me, could it be possible to in fact make a home depot side skirts based on the idea of the lip. not flashy huge skirts just something to accent the sides.??

 

whoa thats good!, but wont it shake when the car idles? my car vibrates alot when its idling cause of old engine supports....

 

thankfully mine doesnt shake at least after its done warming up, but its also made of the foam not rubber so i don't think its gonna be that much of a factor cuz its real light weight, however i think ill bolt it underneath just for safety.

 

yeah me too probably, since we have holes or slots w/e they are on the bottom of the bumper lol

 

i was thinking of making side skirts type lips for the sides, is that to much??

 

I know I posted this before,heres an 89 integra lip on a couple.
Im pretty sure it'll fit the sedan.
All you need to do is shorten it a lil bit and fiberglass.

Any of you socal guys want a rear disc.Im selling complete gts rear suspension with disc brakes and sway bar.

 

That's the Levin bumper though... the north american bumpers won't fit the 88-89 integra lips, but the 86-87 are a better match when shortened as the corners contour with the bumper corners.

 

im still gonna try to go for the home depot lip, i'll post pics when im done and if you guys think its no good i'ii take it off.

 

Stock lip for 93-pre 99.5 jetta/golf with about 4 inches taken out of the middle. Another option is the european spec "vr" lip that is about a third deeper than the na lip posted in pics.

 

4-door that looks exceptional! much better than mine...
(still need those brackets!)

 

Thanks and you'll get your brackets just have a lot of s*** goin on right now.

 

hey guys i went down to home depot and bought my kit Lol, and it actually doesn't look that bad. Although the corners were a (bad word), there are some spots were you can see the tape peek out but i plan on painting the lip plus covering up the tape spots. Ill post pics tomorrow,cuz its dark out

 

i did mine today and the corners were hard, just put like a long bracket where you can screw it so they're all even out and use like 5 screws on the corners haha

 

tape???

i used like 20 screws on my lip.

 

yeah the adhesive of tape would probably wear out pretty quickly, I used screws as well.

 

Pics? I'm curious how this came out...

 

where's artesia? is that close to Anaheim?
But we need a good amount of the SoCal guys, branch out

 

artesia is around Cerritos, Lakewood, and Norwalk area, anaheim is close too, im gonna blurt it out once we get it finalized :thumbsup:

 

norwalk meet anyone???? theres a place where everyone meets of off the 605. its a big ass target/minimall

 

duude make it happen:clap:

 

wish there were more than like 10 gts's in all of Florida...