Some pics after recently adding 19x9.5 wheels and D2 coilovers.

 

Looks great bro, how's the ride now compared to the tein springs?

 

Thanks! Ride's definitely stiffer, but haven't messed with the damping settings yet.

Oh wait, just saw you got d2 coils. in response to your thread, the stock camber should allow anywhere between 1.5-2 However, if i were you id just roll my guards so you dont get any camber wear.

Weird. I wonder why the shop techs told me it couldn't be done on the stock bolts then. Will get my fenders shaved next weekend. What do you mean by roll guards?

dang you got them coils pretty fast. Im not a huge fan of black wheels, but looks good nonetheless. Got any direct side shots?

Haha yeah couldn't wait. Typically, I'm not a fan of black wheels either, but I like these one. If I get bored of the look, I might powdercoat them bronze in the future. I added a side shot above...

 

Oh wait, just saw you got d2 coils. in response to your thread, the stock camber should allow anywhere between 1.5-2 However, if i were you id just roll my guards so you dont get any camber wear.

 

dang you got them coils pretty fast. Im not a huge fan of black wheels, but looks good nonetheless. Got any direct side shots?

 

that is one of the cleanest Camrys I've seen. Very nice.

 

Just adjust the camber bolts yourself bro. Easy. I think its a 23mm bolt? could be wrong though. lifes easy if you got a rattle gun haha

 

great job man!, looks clean yet exquisite.

 

very nice.

I love those wheels

 

love wat u have done to the car i also have d2 coil overs. what size rim and tires do u have all around?

 

nice wheels, i wonder if those would fit on my 06 camry. what website did you order them from?

 

looks great :thumbup:

 

Thanks guys!

Wheel specs are listed above, but they're 19x9.5 +30 and 225/40 all around.

They sell them online, but I picked them up locally so I could do a test-fit beforehand.

 

Next thing is a lip kit? Where you from?

 

Hahaha yeah can't wait to get it. Have a feeling it'll be on before the end of the month...

I knew once I got started I wouldn't be able to stop. Told myself I wouldn't do it too. :facepalm:

I'm in San Jose, CA.

 

your gonna love it man, once i put it on the car it looked way cleaner. Make sure you get the paint properly done lol

 

Hahaha yeah I remember those pics...I know a place that will do a great job for under 5 bills. Can't wait to get that kit on, although I'm going to beat the shiiit out of the front lip I know it. May just do CF white wrap on the front lip from the get go with that in mind haha...we'll see.

lip kit ftw!!!! that is a sick wheel set up gotta slam camber and tuck on those D2's... how are they btw? idk anyone who has D2's on a camry

This weekend I should have it sitting pretty damn flush. Front has actually settled more since those pics--zero gap now. Private has D2 coils on his Cam. He said they were firm and he's not lying. I have it set about 7 clicks from max and I still feel the smallest bump. I pushed it a bit today around a corner and railed it no problem. So I guess so far :thumbsup:

 

lip kit ftw!!!! that is a sick wheel set up gotta slam camber and tuck on those D2's... how are they btw? idk anyone who has D2's on a camry

 

Shaved fenders and ordered RK front lip and rear valence. Sideskirts will be the next step...

 

Nice! What side skirts will you be getting? and yeah, i dont lie my friend haha.

 

Maybe the RK skirts just because they flow with the rest of the kit, but I'm not completely sold on them yet which is why I'm holding out for a lil.

And yes, very happy with the D2 coils so far!! Love being slammed again...

 

"Low is a lifestyle" haha

 

word. in this case it's cool to be a low-life...lol

 

AKM83,
Looking awsome all you need now is your G2 gold caliper paint. The RK kit sould look great once painted and on your car..looking forward to your results !!!!

Glenn

 

gonna wrap the front with carbon fiber still?

 

Still debating...might just go ahead and paint it instead now. Does the kit come with gray 3M double sided tape and mounting kit?

If I get it painted, I'll have the shop install both pieces but using something other than the gray 3M because in the past it hasn't held for me. That, or I'll still do the CF wrap and mount using the 3M VHB tape...that will definitely hold it maybe too much if that's possible.

 

Hey if ur interested can sell u my se front and rear bumpers and lips in exchange for some cash and ur xle ones. Ur car reminds me of mine. Keep up the good work bro. Pm me if ur interested.

 

Hey man, I actually just got the RK kit so I think I'm set. Although, I am thinking about going with the SE skirts instead of the RK ones but I'm not sure yet.

Your Cam was definitely one of my faves!! What car did/are you moving onto anyway?

 

I think he mentioned WRX a few posts ago.

 

Oooh maybe I do remember that a while back...

 

man if only ur from socal i want my headlights housing blackout

 

LOL it's easier than you think!!

Only took about 2-3 hours and removing the bumper is actually the hardest part!

 

^ haha if you can remove the bumper, you can do this!!

Just watch a couple vids online and you'll see it's really not a big deal to open and re-seal. They won't melt, trust me. Unless you set the oven to 400 and leave it overnight...in that case you have bigger problems!!

 

Damn you got a really nice Camry. Wish mine was like that.

Btw What Brand/Model Rims do you have? Those look super sick.

 

Thanks man, they're TE37 replicas, Varrstoen 2.2.2. Maybe one day real Volks...

damn i wanna blacken my headlights too
but it seems scary man
gotta use right sealant and shizzzzz. would rather do it with someone whos done it GOOD before haha.
my friend has done it, and apparently on the corolla he did it on was shocking

You can actually use the same factory sealant that's already on there. After pulling the housing apart and painting, you put everything back together and warm in the oven for a few mins and by that time the factory sealant is malleable again and you can press everything back together. I haven't had any leaks or condensation whatsoever. I'd give it a shot. Just make sure you tape off the chrome rings and highbeam housing!!