I did the oil change on my 06 last month, everything was ok except that the maintanance light wont go off. Can anyone tell me the procedure to get this done.
Thanks in advance.
Thanks in advance.
Firpo
I think I found it:
Revised procedure
Turn ignition key to 'ON' and press the odometer button until the display reads actual mileage... not Trip A or B.
Turn ignition key to OFF.
Hold in the same button you used in step 1.
While holding the button in, turn ignition key to 'ON'.
The 'Maint Reqd' light should blink and go out.
____
Im going to try it later today. If that's not accurate, please let me know.
Revised procedure
Turn ignition key to 'ON' and press the odometer button until the display reads actual mileage... not Trip A or B.
Turn ignition key to OFF.
Hold in the same button you used in step 1.
While holding the button in, turn ignition key to 'ON'.
The 'Maint Reqd' light should blink and go out.
____
Im going to try it later today. If that's not accurate, please let me know.
Firpo eh.. I like Alianza better. 
I'm not sure if disconnecting the ECU fuse will work, but you might want to give that a try.
I'm not sure if disconnecting the ECU fuse will work, but you might want to give that a try.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
