In both the FSM and in a TSB i found this diagram which seems to be in error.
It instructs to measure the length from the top of the socket head to the tip of the threads.
When i do this my reading is about 1/2" too long; my bolt shank diameter doesn't appear to be necked down due to stretching.
In another post i found info that the measurement is from the seat to the tip, which closely agrees with my measurements.
![Image]()
It instructs to measure the length from the top of the socket head to the tip of the threads.
When i do this my reading is about 1/2" too long; my bolt shank diameter doesn't appear to be necked down due to stretching.
In another post i found info that the measurement is from the seat to the tip, which closely agrees with my measurements.
