Toyota Forum banner

Mods on my 2014 Corolla

22K views 22 replies 14 participants last post by  MaCRolla  
#1 · (Edited by Moderator)
I have a 2014 Toyota Corolla Le Eco
MODS:
*9th Gen Tein S tech with 10th gen Struts and shock
*4% 3M FX HP window tint all around with 70% front windshield Suntek CXP tint with 4% visor strip
*TRD rear exhaust
*eBay Le Model front lip

Upcoming MODS:
*roof, door handles and side mirror vinyl wrap gloss black
*MST MT01 black 17x9+35 wrap in Michelin Pilot Sports 215/40/17
*wrap tail light red
*NRG deep dish steering wheel/NRG 3.0 blue quick release/NRG short hub
*LED conversion fog light
*LED conversion high beam
*K&N Typhoon Intake
*Weapon R header
*Tein Street Basic coilover

That's basically it just simple
-Let me know if you have any questions

Image

Image
 

Attachments

#2 ·
I have to 2014 Toyota Corolla Le Eco
MODS:
*9th Gen Tein S tech with 10th gen Struts and shock
*4% 3M FX HP window tint all around with 70% front windshield Suntek CXP tint with 4% visor strip
*TRD rear exhaust
*eBay Le Model front lip

Upcoming MODS:
*roof, door handles and side mirror vinyl wrap gloss black
*MST MT01 black 17x9+35 wrap in Michelin Pilot Sports 215/40/17
*wrap tail light red
*NRG deep dish steering wheel/NRG 3.0 blue quick release/NRG short hub
*LED conversion fog light
*LED conversion high beam
*K&N Typhoon Intake
*Weapon R header
*Tein Street Basic coilover

That's basically it just simple
-Let me know if you have any questions

Whats the reason for changing out the wheel? Don't you lose the airbag?
 
#4 ·
I have a Hps intake a borla exhaust a weapon r header and the pedal camander tr controller
Cool lip where did you get that from.
 

Attachments

#6 · (Edited)
I have a 2015 white S plus with a gloss black roof and door mirrors. It's a simple mod but gives your car a unique look. My advice is that make sure you get 3M vinyl and don't get the cheap stuff. Mine's been on for almost a year and I've had no peeling issue or fading with it in this Texas sun and heat in Austin. Looks like you're in Texas too so I'd definitely go with the 3M. Suspension wise I've gotten a bigger rear sway bar from Megan Racing and I'll be adding a front strut bar in a few weeks. I want to lower it but the roads in Austin are terrible so I'm holding off. I have the Borla exhaust on mine and it is totally worth it. I've had people compliment me on my car and have turned a few heads while driving by, it feels good lol.
 

Attachments

#8 · (Edited)
I had my roof done by the same shop that did my tint in Austin and it came out perfect. I was able to do the door mirrors, lip spoiler, and rims myself and saved some cash. I also got some precut vinyl for my headlights that covers up the upper silver area on eBay. It came with side markers in smoke so everything blends together well. It was well worth it.
 

Attachments

#11 · (Edited)
I have a 2016 Corolla S with the following mods:

Megan Racing Strut Brace
Megan Racing Rear Sway Bar
Megan Racing 2” Lowering Springs
Weapon-R Dragon Intake
Magnaflow Exhaust
Resonator Delete
Pedal Commander Throttle Controller
XXR 527 18x9.75 Wheels
Federal Supersteel 225/40/18 Tires
Rear Camber (? Degrees)
Rally Armor Mudflaps
Yellow Foglight Tint
Side/Front Lip (DIY Garage Door Lip)
Kenwood Sub (12”) and 1000 Watt Amp
Custom Wood Floor Trunk

Image
 
#17 ·
whatever floats your boat on Mods guys and gals... but bstance you ought to rethink the wheel mod. I sell insurance as a second career and can tell you if you get into an accident with personal injuries, your mod intentionally removing the driver's airbag is going to invalidate your policy. It'd be the same for intentionally defeating any safety feature. Yes, there are other airbags, but no, they don't take the place of the steering wheel bag. Be safe out there folks.
 
#19 ·
whatever helps you remain in the seat and away from the steering wheel, dash, or thrown outside of the vehicle is better than nothing. However, the fact remains that insurance underwriters will drop you like a hot lump of coal if they see you've intentionally defeated any safety feature. They might not know in advance of an injury claim, but they certainly would find out why the bag didn't inflate like it should have if they're asked to compensate for injuries. I'm not saying bags are good, that opinion is yours to ponder, what I am saying is that you may be walking the line alone when it comes to making that mod and having anyone other than yourself pay for injuries you sustain because of it. Mod away folks, but remember this, STAY SAFE. It's not enough to have a tricked out ride... it has to be tricked out and safe for you and others to be in.
 
#20 ·
I have a 2014 Toyota Corolla Le Eco

MODS:

*9th Gen Tein S tech with 10th gen Struts and shock

*4% 3M FX HP window tint all around with 70% front windshield Suntek CXP tint with 4% visor strip

*TRD rear exhaust

*eBay Le Model front lip



Upcoming MODS:

*roof, door handles and side mirror vinyl wrap gloss black

*MST MT01 black 17x9+35 wrap in Michelin Pilot Sports 215/40/17

*wrap tail light red

*NRG deep dish steering wheel/NRG 3.0 blue quick release/NRG short hub

*LED conversion fog light

*LED conversion high beam

*K&N Typhoon Intake

*Weapon R header

*Tein Street Basic coilover



That's basically it just simple

-Let me know if you have any questions



Image


Image
Nice ride!

I have a question. How much inches from the ground to the bottom of the lip? I am pondering to get the front lip, but not sure how low it will be to the ground.
Btw, we have the same drop: 9th gen Tein S-techs.


Sent from AutoGuide.com Free App