Toyota Forum banner

Tweeter not working properly

1.4K views 5 replies 4 participants last post by  bigloubumpin  
kkrkeith7 said:
Ok, I fixed the problem. A couple of the strands of copper running through the screw terminals on the crossover were toucing the metal basket frame (I took it off the change the tweeter output to -3db, and put them back on reverse, the other side stuck out more) I re-wired so none of the wires were close to the metal basket frame and problem is gone.
way to go :clap:
 
Mr Marv said:
You may try switching the crossovers. If the noise moves to the right side it may well be the crossover. If it stays to the left it could be a shorting wire or the tweeter itself (if you have a continuity tester you could use that to check if a wire is shorting).
Are u the same Mr.Marv that builds enclosures?