I got mine on there for $145 shipping. Yes they work. But they lower your car a lot more then normal springs for a 10th gen. I got a 3.5 inch all around.

 

Ok so um thinking of putting some xxr 521 18x8.5 +35 with really thin tires. Do you think the car will be exactly.flushed or will the fender go past the tire?
Do you have pics of urs? Also did you have to replace ur struts

 

Why would you put a "really thin tire" on a 8.5" wheel? Install a proper 225/40R18 for good handling.

 

I used my stock struts. Once I need nee tires I will get adjustable shocks and adjustment shims to make the alignment 100%
Here is before

After

 

Very nice! That's the stance I'm looking for. You wheels are the XRS stocks that are ?/?/17s? What are offset #? Thanks

I used my stock struts. Once I need nee tires I will get adjustable shocks and adjustment shims to make the alignment 100%
Here is before

After

 

that looks sick bro!
How low are you from the ground?
Do you scrape?
Also.. do you think I can put spacers on the stock wheels?

 

No spacers. And it scapes a lot but its cause those little lip shits. It's not that low. Still like 4 inches bumper to ground I think. I forget

 

Do you think it's possible to put spacers on em though?

 

Yeah no problem. Idk how big though. Never measured

 

you can add spacers, just you need to measure in mm, i think 20mm or 25mm should work well with stock.. someone will chime in i'm wrong. if you get spacers make sure the hub bore is 54.1mm.

 

Will these work?

And I would need to buy two of these right?

 

http://www.nlmotoring.com/XXR-521-Wheels-18x8-5-Flat-Gun-Metal-p/52188109.htm
Hey will these fit because it says centerbore is 73.1 and right now solar said it has to be 54.1 .... or am I mistaken?
Is hub bore and center bore the same thing?