Toyota Forum banner

AE101 JDM Conversions (Front and Rear)

86K views 22 replies 19 participants last post by  Rukt  
#1 · (Edited)
hope this helps...

Image


Image


Image


Image


Image


Image
 
#7 ·
Being the anal type, I feel it my duty to make some corrections to this information, as many of them are not accurate to those sold in Japan. I shall add my notes in the order of the pictures. I'm not doing this to criticise anyone, just to share my knowledge with the rest of you so that it may be put to good use.

Pre-facelift front end: This is not the '93-'95 JDM front end... it's the 6/91-5/93. The front bumper is shared with Corolla saloons and estates sold in Europe from '92-'97 and shared with E10 Corollas sold in Australia from '94-'99. As it was so widely used, it easily accepted number plates of any size. E10s sold in EU countries had the wing-mounted (fender) side turn signal repeaters, while those that borrowed from Japan had the repeaters integrated into the parking light, as many Japanese cars have. Headlights appear the same as E-code ones (sans E-code lens markings!), differing only slightly in light distribution within the beam pattern (in RHD versions that is). The "C" grille was used on all 9/91-'01 E10 Corolla vans and so-called business wagons (vans with more trim), but without the hint of chrome trim that the saloons have. Other countries used a modified version of it that had a Toyota "T" emblem instead of a Corolla emblem.

Facelift front end: This was the '93-'95 JDM front end (the E11 saloons replaced the E10 saloon range in mid-'95). Front bumper is found on all E10 vans made from the '93 facelift until their demise in 2001. The bottom picture is the saloon grille, while the top is the one used on wagons, and all European hatchbacks built 5/95-5/97. Said hatchbacks (Europe's facelift) also used a similar looking bumper to this, but still markedly different.

Sprinter Van/Business Wagon: Differs from facelifted Corolla vans and business wagons only by the grille and the Sprinter emblem on the cargo hatch. There were never any E10 Sprinter Touring Wagons. Instead, the Sprinter Carib skipped a generation. The E9 (AE92/AE95) Sprinter Carib (known in North America as the Corolla All-Trac estate) was built through 1995, then went directly to the E11 (AE111/AE114/AE115). By the way, the distinction between the vans/business wagons and the Touring Wagons was simple: the former had a solid rear axle located by archaic but effective leaf springs, while the latter sported the same three-link Chapman strut arrangement underpinning all other Corollas and numerous other Toyota models.

FX, but not SE Limited: Contrary to popular belief (and nomenclature), SE Limited saloons still came with the same front end as lesser Corolla saloons. This bumper only came in Japan on the AE101 FX SJ and FX GT from 5/92-5/95, but was standard fare on all EU 3-door and 5-door hatchbacks built in the same time period (liftbacks notwithstanding... they used the 5/91-5/93 Sprinter front end. Also, the crystal headlights and corner lights never came on any Corolla saloons or hatchback. They came with the same standard headlights as all other Corollas. A few notes on that further down.

(Nothing to add to Sprinter saloons)

2nd Facelift Touring Wagon: Foglights notwithstanding, this front end came on ALL Corolla Touring Wagons built 5/97-8/00. Before the second facelift, even BZ-Touring models had the front end in the picture second from the top. However, the facelifted BZ-Touring WAS the only model to ever come with the coveted black housing crystal headlights. Lesser models had the chrome version. Finally... what makes a Touring Wagon a Touring Wagon? Quite simple, really: it says Touring on the cargo hatch, and came in three basic trim levels: L-Touring, G-Touring, and BZ-Touring.

And beyond that, I have nothing more to add.

By the way, if anyone wants the definitive breakdown of the E10 family's chassis codes and what they mean, speak up and I'll post it.
 
#8 ·
thanks for the headsup. :D the years for the 1st 2 sets of pictures (93-95, 96-97) are based on the E10's production date back here in the PI (as i'm more familiar with the local market). the intent of my post is to show the different kinds of OEM face and rear-end conversions available to the E10 peeps as i'm no historian. :mrgreen:
 
#18 · (Edited)
Refering to the foto VooDoo posted, my corolla is currently using the 1996-1997 face (World class) grille (the 2nd foto).

In order to use the BZ-touring grille, do i need to change the bumper too? Actually I already tried but looks likes it doesn't fit. i've seen a corolla with a BZ-Touring grille attached to a 1996-1997 face bumper. Does anyone have any idea how it is modified?

How about the headlamps? Are they different? Do i need to have them too? Is the BZ-Touring bumper & grille is the same as the one with over rider?

Btw, i got two grille's:
1. 1993-1995 Face (but with toyota logo, not the lucky star logo)
2. 1996-1997 (World Face) - 2nd foto

I'm looking for 1996-1997 Grille (the 1st Foto). If anyone have it and want to exchange with mine, do reply. i prefer the grille in white or originally unpainted black.

Fyi, all my no.1 grille's foots are ok/not broken except for grille no.2 where the right upper foot got minor crack but sealed with glue. Give your email add if you want the foto's.

Delivary cost will be paid by both parties. My location is Malaysia.