the corner lamp slides out towards the front of the car after you unhook the plastic clip

 

Just did this 2 hours ago... the wiring harness to the bulb has about 6 inches of slack so you pull the whole unit out (slide forward as grapefury said) and then twist the socket to remove it from the lens assembly. Took me all of 10 minutes... 'course I have spent quite a few hours (read thousands) in my bro's body shop over the years.

 

wow this was the easiest mod, why so many people have trouble, and do a search there are numerous threads on this

 

Get a piece of paper and wedge it between the corner lens and the headlight, then get a flat screw driver and stick it in there too. Pry the corner lens out (away from the car) it'll make a pop sound, then just slide it out, towards you.

 

^ the easiest mod I ever faced was shaving the LE off the back. all i needed was some tooth floss..

 

^ the easiest mod I ever faced was shaving the LE off the back. all i needed was some tooth floss..

but this is pretty easy too

 

Its not that easy. It takes a lil work and it was scary for me since it was my first mod and didn't wanna break anything.

Take a screwdriver and put some tape on it so you dont scratch up the paint pry it a lil on some places.

Yeh do a search.

 

lol when camnub did his, i had wrecklessly pull the stock corner off, probably scared the crap out of him:lol:

 

How much were the corners? GOt pics? You happy with them?

 

if u cannot do it. do not shoot ur self.

Take out the car manual that came with your car. It will have pictures, yes.. PICTURES and step by step instructions.. have fun.

I think the lights cost like 11$ but they get you on shipping ($10-18). Be willing to pay up to $38-40 shipped.