Toyota Forum banner

tire still hitting swaybar with TC UCAs

1.8K views 7 replies 6 participants last post by  05Moose  
#1 ·
Is it normal to have the tire (265/75R16) hit the sway bar after a 2.5 inch lift with TC uca's?
 
#4 ·
1.5 aal, toytec red adj coil overs set at 1.5"(thread to collar) and 5100's, sway bar relocating blocks.

Talked to toytec, "make sure sway bar is centered"(it is)- Seems hard to screw that up. Hits RH fwd inboard.

Stock wheels running the same old 265/75/16's without previous issue.

Searched seems some take off the sway bar or just live with it.
 
G
#7 · (Edited)
So I trimmed the lower rock guard and installed spidertrax 1.25 spacers all around, doesn't hit anymore but the ride seems to have suffered a little......


2 accounts wtf(some issue with the wrist twisters forum) and this one maybe same software? That is my name~ Dacapster